|
|
 TD-1000 C
Oil in Water Monitor
- Measures Oil in Water: Continuous on-line monitor measures ppb or ppm oil in water
- Boiler, Cooling System and Environmental Protection with earliest oil leak detection on the market
- UV Fluorescence technology provides highest sensitivity available
- Highest sensitivity = lowest detection limit = earliest warning of oil contamination
The field-proven TD-1000C is rugged and reliable with the lowest maintenance in the industry. Its fluorescence sensor technology provides high accuracy and repeatibility as well as the earliest leak detection available. It delivers the same remarkable performance expected of all Turner Designs Hydrocarbon Instruments' products.
It comes to you complete and ready to be installed in your system with a pressurized side stream from the process. It includes 316SS mounting bracket and isolation valves. The sample remains pressurized for easy return to the process or to atmospheric drain. An on-board Cell Condition Monitor alerts operations if the measurement cell requires cleaning. Includes standard alarm relays and 4-20mA output for remote monitoring.
Specifications
| Applications |
Steam Condensate, Boiler Feed, Cooling Water, Clean Water |
| Operational Principle |
UV Fluorescence |
| Hydrocarbons |
Fuel Oil, Crude Oil, Other Fuels and Oils |
| Detection Range Fuel Oil, Crude Oil |
20ppb in Steam Condensate - 500ppm |
| Response Time |
5 seconds spike change, continuous reading |
| Local Display |
PPM, PPB, Or Raw Fluorescence Units (RFU) |
| Controls |
External Touch Pad |
| Power Requirements |
90 - 250 VAC, 5A |
| Alarms |
Solid State AC Relay High Alarm (3A fused, 90 - 250 VAC), 5VDC Cell Condition Alarm, 5VDC System Alarml |
| Outputs |
4-20mA Powered, 500ohm. Max Impedance |
| Diagnostics |
Self Diagnostics, internal failure linked to alarm |
| Communication Protocols |
(Unidirectional Hart, Mod Bus Optional) |
| Mounting & Plumbing Hardware |
316 SS |
| Plumbing Requirements |
See General Arrangement Drawing |
| Flow Cell Characteristic |
Quartz Closed Tube with Cell Contition Monitor and Alarm |
| Pressurized Sample Return |
Yes, or Unpressurized to Drain |
| Typical Flow Rates |
100mL/min to 4L/min |
| Min / Max Sample Pressure |
5psig / 100psig, 0.35barg / 6.9barg |
| Max Sample Temperature |
71°C, 160°F (Sample Cooler is Optional) |
| Ambient Operating Temperature |
32°F - 120°F, 0°C - 49°C |
| Calibration Stability |
+/- 10% over 6 Months |
Calibration
|
Blank / Standard Addition via Syringe Injection Port |
| Reagents |
None |
| Security |
Password Protected |
| Communication Protocols |
Optional: Hart, Mod Bus |
| Diagnostics |
Self Diagnostics, internal failure linked to alarm, Cell Condition |
| Security |
Password Protects Software, Lockable Enclosure |
| Electronics Cabinet |
Non Metallic |
| IP Rating |
IP 66, NEMA 4X |
| Maintenance |
Calibration Check, Clean Flow Cell on Alarm |
| Cleaning Chemicals |
Detergents, Dilute HCL, or Solvents (Customer Furnished) |
| Explosion Proof Options |
Gen Purpose Only (Use TD-4100 XDC for Explosion Proof Areas) |
|
Sample Pump
|
Optional |
| Certifications |
CE Marked, CUL |
©2007 Turner Designs Hydrocarbon Instruments
2023 North Gateway, Suite 101
Fresno, CA 93727
(559) 253-1414
(559) 253-1090 - Fax
Gulf Coast Office
2200 N. Loop West #126
Houston, TX 77018
(713) 263-9099
(713) 263-9228 - Fax
|
What's New
Join us at the Offshore Technology Conference, Booth 4005. May 5th - 8th at the Houston Reliant Center
Job Openings
view current positions >
February 14, 2008
Turner Designs Hydrocarbon Instruments, Inc. of Fresno, CA USA announces Roger McEvoy has joined their staff as the new Sales Engineer.
read more >
As seen in
Process Heating
Oil Leak Detection in Heating and Cooling Systems
read more >
As seen in
Process Cooling
October 2007
Heat exchanger monitoring and protection using UV fluorescence technology
read more >
December 11, 2007
Analysis For Hydrocarbons in Glycol.
Refineries and Gas Processing Plants use Glycol to dehydrate oil and gas, reducing the amount of water to less than 0.5%. Once the glycol has dehydrated the hydrocarbon the glycol is “rich” with water and hydrocarbon.
read more >
November 14, 2007
Turner Designs Hydrocarbon Instruments, Inc. announces the success of their 2007 Dealer Training in Fresno CA. read more >.
November 14, 2007
Turner designs Hydrocarbon Instruments, Inc. of Fresno, CA USA announces Shawana Lillard will join their staff as Marketing Assistant to Gary Bartman, President. read more >
The TD-1000C Oil in water monitor for oil leak detection in steam condensate and process cooling water is now available from Turner Designs Hydrocarbon Instruments, Inc., Fresno California.
The low cost and low maintenance TD-1000C is a fluorescence technology based instrument with the lowest detection limits on the market. It can detect fuel oil in steam condensate at below 50ppb (parts per billion).
read more >
Use of TD-500D Oil in Water Analyzer by US Coast Guard's Enforcement Unit
Oil in water monitoring experts Turner Designs Hydrocarbon Instruments announce the use of their TD 500D portable oil in water analyzer by US Coast Guard’s enforcement unit to check the oil content in water from ship’s Oily Water Separators & Overboard discharges.
read more >
Houston Office Opening
Turner Designs Hydrocarbon Instruments, Inc. is pleased to announce the opening of a Sales and Service Office in Houston.
read more >
Oil Leak Detection in Heat Exchangers for Heating and Cooling Systems
Turner Designs Hydrocarbon Instruments introduces the new ‘C’ series of continuous on-line oil in water monitoring instruments.
read more >
Major oil in water monitor supply contract won by Turner Designs Hydrocarbon Instruments, Inc.
Turner Designs Hydrocarbon Instruments of Fresno, CA USA has won one of the largest oil in water monitor supply contracts in the history of the offshore oil and FPSO business.
read more >
Portable Oil in Water Analyzer New Dual-Channel TD-500D
Turner Designs Hydrocarbon Instruments, Inc. announces a major improvement to their very popular TD-500 handheld oil in water analyzer.
read more >
TD-4100 Oil in Water Monitor bilge alarm receives US Coast Guard certification for IMO Resolution MEPC.107(49)!
Turner Designs Hydrocarbon Instruments, Inc. of Fresno, CA, USA announces that the USCG has completed the certification of the TD-4100 for bilge water monitoring per International Maritime Organization requirements MEPC.107(49).
read more >
Crude Oil Spill on the Ohio River Monitored by the TD-500 Oil in Water Meter
Turner Designs Hydrocarbon Instruments, Inc. is helping the Ohio River Valley Water Sanitation Commission (ORSANCO) in monitoring the 63,000 gallon crude oil spill on the Ohio River.
read more >
Oil Spill / Oil in Water Analyzer, hand held, accurate and repeatable results in less than 4 minutes. TD-500 Oil in Water Analyzer is available from stock for immediate delivery from Turner Designs Hydrocarbon Instruments, California, USA. Detect crude oil spills such as that on the Delaware River USA in minutes using the same proven field method used on the world’s offshore oil production platforms. Sensitivity to crude oil down to less than 1 ppm in water.
Turner Designs Hydrocarbon Instruments supplies single sample analyzers and continuous on-line oil in water analyzers to all industries from drinking water to power plants, to heavy industry and oil production facilities worldwide. Contact Turner Designs Hydrocarbon Instruments at sales@oilinwatermonitors.com or 1-559 253-1414.
New Hand Held Oil in Water Meter for Produced Water and Crude Oil in Water
Turner Designs Hydrocarbon Instruments (USA) announces the next generation rugged and reliable oil field oil in water monitors for crude oil and produced water applications. The industry leader who brought you the TD-360 FastHEX and the TD-4100 XD continuous on-line oil in water monitors has just released the TD-500 TM hand held / bench top oil in water meter for crude oil. The new UV Fluorescence meter measures oil in Produced Water, Desalter Tail-Water, Crude Storage Tank Water, and in any application where crude oil may be in contact with water. It is viable for all crude oil and most gas production condensates.
It uses the same easy-to-use FastHEX procedure used on the famous TD-360 with the same high accuracy and repeatability but the new TD-500 meter is half the price of the nearest competition. The analysis method is compatible with all popular solvents including hexane, Vertrel, AK-225, Freon, xylene, and others.
The TD-500 is powered by 4 AAA batteries, weighs less than 1 pound and produces oil in water measurements in less than 4 minutes. It requires no special training and measurements correlate to EPA standard oil and grease laboratory methods. It is completely sealed meeting IP 67 Standard. It is water-proof, dust-proof and corrosion-proof and carries the CE mark.
TD500 Fact Sheet
|
|