TD-4100 C

 








Specifications

Applications Steam Condensate, Boiler Feed, Normally Clean Water
Hydrocarbons Fuel Oil, Crude Oil, Other Fuels and Oils, Phenol, Styrene, Most Heat Transfer Fluids, Aromatic Chemicals, BTEX
Detection Range: Fuel Oil, Crude Oil 5 ppb in Steam Condensate - 500ppm
Low Detection Limit: Other Hydrocarbons Depends on the Type, Generally < 50ppb
Dimensions 19.5 " x 17.5" x 9.75" (49.5cm x 44.5cm x 24.5cm)
Weight 55 pounds (24.9 Kg)
Local Display Yes, PPM, PPB, Or Raw Signal
Controls Internal Touch Pad, Password Protected
Power Requirements 90 - 240 VAC, 2A, 24 vdc Optional
Plumbing Requirements Feed: 3/8" or 1/2" Tube, Return: 3/8"or 1/2" Tube
Sample Pressure <150psig, 10barg (For higher pressures consult factory)
Sample Temperature 100°C, 212°F (For higher temperatures consult factory)
Required Air Supply General Purpose None
Ambient Operating Temperature 32°F - 121°F, 0°C - 49°C (Heater or Vortex Cooler Optional)
Flow Cell Characteristic Closed Tube with Internal Cell Condition Sensor
Pressurized Sample Return Yes
Operational Principle UV Fluorescence
Calibration Stability +/- 10% over 6 Months
Response Time 3 seconds full scale spike change, continuous reading
Calibration Blank / Standard Addition or Correlation to Standard Methods
Reagents None
Alarms 4: Early Warning / High Alarm / Cell Condition / CIP
Alarm Contacts Dry Contact AC/DC
Outputs 4-20 mA, 24vdc powered, 500 ohm impedence
Communication Protocols Optional: Hart, Mod Bus
Diagnostics Self Diagnostics, internal failure linked to alarm, Cell Condition
Security Password Protects Software, Lockable Enclosure
Electronics Cabinet FRP
IP Rating IP 66, NEMA 4X
Maintenance Calibration Check, Clean Flow Cell
Cleaning Chemicals Detergents and/or Dilute HCL
Explosion Proof Options Gen Purpose, Optional C1D2

Sample Pump

 Optional
Semi Automatic Cleaning System Optional
Data Logger Optional

©2007 Turner Designs Hydrocarbon Instruments
2023 North Gateway, Suite 101
Fresno, CA 93727

(559) 253-1414
(559) 253-1090 - Fax

Gulf Coast Office
2200 N. Loop West #126
Houston, TX 77018

(713) 263-9099
(713) 263-9228 - Fax

Technical Data Sheet

TD-4100 C Oil in Water Monitor

United States Coast Guard (USCG) Certifies the TD-4100 and TD-4100 XD for 15 ppm Bilge Alarm Monitoring

July 1999 - The USCG certified both the Turner Designs TD-4100 and TD-4100 XD on-line oil in water monitors as Oil Content Meter – 15 ppm bilge alarms. The USCG certifies that the oil content meters comply with the 15 ppm bilge alarm regulations stipulated by regulation 16(5) of Annex I to Marpol 73/78. This certification package comes on the heels of the Canadian Coast Guard Certification of the TD-4100 as a 5 ppm bilge alarm that was issued in January 1999. The USCG certification lead to an immediate American Bureau of Standards (ABS) approval letter for the TD-4100 XD deployment on an ABS classed vessel.

"The TD-4100 series non-fouling detection technology finally solves the marine industry’s expressed concern that traditional oil in water monitoring technology is simply unreliable" said Mark Uhrich, Director of Sales and Marketing. "The TD-4100 series oil in water monitors repeatedly demonstrate low maintenance performance enjoyed by the oil & gas industry for offshore platforms, FPSO’s, FSO’s and drilling rigs. Now with USCG certification the marine industry can significantly improve their bilge water discharge programs."